ED4-2

Evaluation of flux trapping moat position on AQFP cell performance

Dec.2 18:25-18:40 (Tokyo Time)

*Coenrad J Fourie1, Naoki Takeuchi2, Kyle Jackman1, Nobuyuki Yoshikawa3

Department of Electrical and Electronic Engineering, Stellenbosch University, Stellenbosch 7600, South Africa1

Institute of Advanced Sciences, Yokohama National University, 79-5 Tokiwadai, Hodogaya, Yokohama 240-8501, Japan2

Department of Electrical and Computer Engineering, Yokohama National University, 79-5 Tokiwadai, Hodogaya, Yokohama 240-8501, Japan3

With recent advances in InductEx and the TetraHenry numerical engine, it is now possible to analyze the coupling of trapped flux in moats to superconductor circuit structures. Here we show the analysis of moat position in the layout of an adiabatic quantum-flux-parametron (AQFP) buffer cell on the coupling to critical inductors such as the load inductor. This inductor is often carefully laid out to balance current flow and cancel out stray coupling between clock and dc current excitation lines. We investigate the effect of trapped flux that couples asymmetrically to the circuit—either due to the moat position and shape or due to only one of a symmetrical duo of moats being filled with a trapped fluxon—on circuit operating margin and performance. We conclude with suggestions on moat placement to reduce the chances of circuit failure when fluxons are trapped in the moats.

Keywords: AQFP, coupling, fluxon, moat